Get a grip on installation
Installation is easy:
Tips and Tricks!
TIP 1: Fit Grips will fit onto the hand rims of 24"-26” wheels. Larger wheels will require you to pre-stretch the grips.
TIP 2: It may be easiest to be out of your wheelchair when mounting the Fit Grips.
TIP 3: For larger hand rims, it’s a good idea to recruit a friend to hold it in place while you pull it the rest of the way.
TIP 4: Wedge the grip in between the hand rim and the wheel to keep it from slipping off. Once the grip is completely over the hand rim, go back and adjust it into place.
Using the optional glue:
1. To remove your glued Fit Grip, use your hands to peel a section off of the handrim. Pull firmly, and the grip should come off the handrim leaving behind the glue.
2. Clean the remaining glue off your handrim with a generous amount of acetone or citrus-based cleaner. Residual glue can be pulled off by hand.
the kick-butt warranty
Fit Grips are made out of high-quality rubber that will last for a year during normal use. But sometimes, life isn’t normal. That’s why we offer our Kick-Butt Warranty. If you break or lose one of your Fit Grips within 6 months of your purchase date, just fill out the form at http://www.intelliwheels.net/fit-grip-warranty and we’ll send you a new pair, no questions asked. That’s Mobility Made Easy.
The warranty will replace Fit Grips that have been damaged and have a tear more than 1/4” long. Small nicks and scratches are not grounds for a warranty replacement.
WHAT ABOUT AFTER 6 MONTHS?
There are many things in life that don’t last forever. The tires, tubes, and bearings on your chair will eventually need replacing. Fit Grips are no different. When it’s time for a new pair, just place an order on our website or with one of our many resellers.